Designed with larger diamond particles compared to regular grit for gross reduction of natural tooth or removal of faulty restorations. 8 different shapes are available.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 173
Head Length (mm): 10
Head Size (1/10mm): 017
Total Lengh: Regular
Band Color: Green -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 171
Head Length (mm): 7
Head Size (1/10mm): 014
Total Lengh: Regular
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 166
Head Length (mm): 10
Head Size (1/10mm): 016
Total Lengh: Regular
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
These popular silicone polishers are impregnated with high quality polishing ingredients for fast and brilliant polishing of amalgam, gold and cast alloys.
Packing:
12/Box
-
Benefits:
- High gloss polish achieved in 3 co-ordinated steps
- Brownies, Greenies and Supergreeniess are autoclavable or can be disinfected in cold sterilization and doesn't require any polishing paste or pumice
- Precise concentricity with low vibration and minimal heat generation
- Fast, efficient and durable for consistent performance over time
- Mini-points are recommended for polishing occlusal surfaces and Cups for proximal and occlusal areas; both available in CA/ FG shank
Indications:
Ideal for chairside and in lab pre-polishing, polishing and high-gloss polishing of metallic restorations such as inlay, onlays, crowns and bridges.
Brownies - for achieving a smooth surface
Greenies - for a lustrous polish
Supergreenies (with yellow band) - for a final superpolish -
Recommended Speed Range: 5000-7000 rpm
Contact Pressure: 1-2 N (Water coolant to be used for amalgam polishing
A radio-opaque glass ionomer luting material is now available in capsules for a simple, fast and predictable application.
Brochures Instructions for Use
Packing:
Zirconomer P 1-1 Set (PN C0040)(Powder 12g & Liquid 5ml)
Zirconomer P
Zirconomer P
-
- Zirconomer P features a robust architecture that strengthens and reinforces tooth structure while providing a secure marginal seal for strong and durable posterior restorations.
- The self-adhesive restorative material eliminates the risk of polymerization shrinkage and facilitates a stable chemical bond to natural dentin and enamel without any interfacial stresses for greater longevity, minimal post-op sensitivity and optimal dimensional stability.
- Zirconomer P saves clinical time as no priming, bonding or extensive tooth preparation are needed. All you need to restore defects, is mix, bulk-fill cavities and finish at one go, while preserving healthy tooth structure.
- The biocompatible, monomer and mercury free, amalgam alternative is safe for patients of all ages and prevents secondary caries by providing a fluoride-rich milieu. Suitable for standard and high caries risk cases, Zirconomer P ensures predictability with total peace of mind. -
-
MiCD C02 LED Curing Light is a wide spectrum, high intensity light curing unit designed to predictably cure all light cured dental materials. A slim ergonomic wand design with low profile head enables easy access to all areas of the mouth.
The MiCD LED Light curing unit is engineered with a dual range wavelength (390 ~ 480 nm/ 440 ~ 480 nm) optimized for the power mode selected to meet specific clinical indications.
Packing:
Each
-
MiCD LED Curing Light Contents:
-Curing Light Handpiece with Charging Station
-10 mm Direct Light Source Head
-Protective Shield
-Disposable Curing Light Shields (100 pcs)
-Power Adaptor: 100-240 V
Coat-It is a light-cured self-adhesive resin coat designed to provide a strong and protective seal on the surface of Glass Ionomers, provisionals and direct resins for enhanced mechanical properties, durability and aesthetics of the restoration.
Packing:
Coat It 6ml
50 x Disposable Brush Fine (Pink)
25 x V-Dish
-
- Remarkably natural surface gloss with just 10 seconds of cure
- High degree of surface cure with minimal residual monomer
- Seals, protects and strengthens surface of glass ionomers, provisional restoration and direct resins
- Remarkable wear and stain resistance for restorations that remain stable over time
- Exceptionally strong and durable bond to various substrates- to enamel, dentin, glass ionomer and resins with virtually no gap -
-
All it takes is a thin layer of Coat-It (LED / Halogen) to significantly decrease the surface roughness on the Glass Ionomer restoration and boost its strength.
Dura-Polish ia an aluminum oxide impregnated (73% by weight) polishing wax that imparts a homogeneous surface on a range of restorations.
Packing:
1/Jar
-
Benefits:
- Pre-polishes Indirect Composites materials efficiently due to its high degree of abrasiveness and specific particle size
- Inclusion of three different grits of alumina particles ensures that scratches are eliminated easily
- Adhesive character of the paste ensures maximum surface contact
- Optimal paste viscosity minimizes splattering
Indications:
Designed for pre-polishing of indirect composite restoration and super polishing hard resin, denture base resin and all kinds of dental metals. -
Packed in a jar of 20g
-
Recommened Speed Range : Max. 10000 rpm
Usage Note: Extra-oral use with Robinsons Brush or Buff Wheels in HP Shank
Super-Snap X-TREME Standard disk kit with 50 pcs each of red and green X-TREME standard disks while the X-TREME Mini-Disk kit contains 50 pcs each of red and green X-TREME mini disks.
Packing:
1/Kit
-
Benefits:
- Specific abrasive grits used for each of the 3 co-ordinated polishing steps
- Abrasive grains and binder are perfectly matched
- High gloss polishing without the need of additional, messy polishing paste
-Low vibration and minimal heat generation
Indications:
Available in 3 differeent grits HP Shanks only:
Coarse (dark grey) - for adjusting
Medium (brown) - for finishing and pre-polishing
Fine (light grey) - for polishing -
Super-Snap X-TREME Mini Disk Kit [PN 0507] Contains:
- Super-Snap X-TREME Mini Green & Red Disks x 50 -
Recommened Speed Range : 10000-12000 rpm/ Max 15000 rpm
Contact Pressure: 0.3-0.6 N
Usage Note: Dry
Made of a high concentration of aluminium oxide with silicone as binder, created specially for finishing and polishing of direct resin restorations with only one instrument, just by altering the contact pressure.
OneGloss Complete Set Contains:
Unmounted Polishers x 20 each shape, CA Mandrels x3
Packing:
20/Unmounted Polishers
3/CA Mandrels
-
Benefits:
- Saves time as finishing and polishing can be achieved with a single instrument
- Eliminates the need for polishing paste
- Disposable polishers comply with infection control protocols
- Low vibration and minimal heat generation
Indications:
Ideal for:
- Finishing and polishing of all tooth coloured restorations
- Creating surface texture on direct cosmetic restorations
- Removing surface stain without damaging the enamel
- Polishing enamel after scaling
- Removing excess cement without marring enamel or damaging delicate inlays
- Removing excess cement after Orthodontic debanding -
Shape: Cup, Midipoint, IC, Mandrel
ISO No.: 060, 060, 100
-
Recommened Speed Range: 3000-10000 rpm/ Max. 15000 rpm
Contact Pressure: 1N (for Finishing)/ Feather Light (for Polishing)
Usage Note: Water coolant when finishing & Dry when polishing
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 165
Head Length (mm): 8
Head Size (1/10mm): 010
Total Lengh: Regular
v
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm