A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 001
Head Length (mm): 1.3
Head Size (1/10mm): 015
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 450,000 rpm
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
Comprising ultra-fine diamond particles to ensure a smooth surface for fine finishing of crown preparations, composites, porcelain as well as glass ionomers.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 249
Head Length (mm): 4
Head Size (1/10mm): 010
Total Lengh: Regular
Band Color: Yellow -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
A reliable range of carbide burs in different shapes with various flute designs to suit a variety of applications such as fast chair-side or bench side application on removal prostheses.
Packing:
1/Case
-
Benefits:
- High-grade tungsten carbide burs are developed to provide enhanced cutting efficiency with remarkable durability
- Uniform concentricity assures minimal vibration and precise trimming/ adjustment of either acrylic resin or cast metal
- Available in 6 different types of cutting surfaces and a total of 29 shapes:
Coarse (C) – for gross reduction of plaster
Normal Coarse (NC), Normal Cross Cut (N) & Basic Plain Cut (B) – for trimming and initial finishing
Normal Fine Cut (NF) & Diamond Fine Cut (DF) – for anatomical contouring and finishing
Indications:
Developed for efficient adjustment of acrylic resins, nickel-chrome cobalt alloys, chrome-nickel alloys and precious alloys.
Specially designed carbide bur in FG and HP shank with a unique trigonal pyramid shaped tip or perfect pointed- end.
Packing:
6/Case
-
Benefits:
- Special three-blade tip design is highly abrasive with superior cutting efficiency for precise replication of intricate surface details
- Made of high-grade tungsten carbide for remarkable durability
- Fissure Carbide in FG Shank used with Lab Air Z, is preferred by ceramists for anatomical carving
- The Fissure Carbide in HP shank used for carving of indirect composites (e.g. Ceramage) as well as acrylic dentures
Indications:
Created for a variety of applications such as:
- Anatomical carving of pit & fissure
- Minor adjustment of interproximal area of bridges fabricated with porcelain, indirect composite, hard resin, denture base acrylic and a range of dental alloys
- Trimming of interdental papilla of denture
- Removal of porosities and excess materials -
Recommended Speed Range (HP Shank):
Indirect Composite:
- Pressure: Feather touch
- Quantity that can be trimmed with one bur: 20pcs for Premolar and 15pcs for Molar
- Recommended rotating speed (rpm): 8,000
- Maximum rotating speed: 50,000
Porcelain:
- Pressure: Small amount of pressure
- Quantity that can be trimmed with one bur: 4-5pcs
- Recommended rotating speed (rpm): 10,000-15,000
- Maximum rotating speed: 50,000
Precious alloy:
- Pressure: Feather Touch
- Recommended rotating speed (rpm): 8,000
- Maximum rotating speed: 50,000
Non precious alloy:
- Pressure: Small amount of pressure
- Recommended rotating speed (rpm): 10,000-15,000
- Maximum rotating speed: 50,000