Designed to securely hold all Shofu unmounted wheels and disks for optimal control during laboratory use with a straight handpiece.
Packing:
12/Box
-
Benefits:
- Available in both HP & CA shank, in a box of 12's
- 2 specific types of CA Mandrels are available (Latch type):
1. CA Mandrel with Christmas tree shaped head securely holds the flexible plastic mounts of Super-Snap, Super-Snap Buff and SuperBuff disks in place
2. CA Mandrel (white banded shank) with a specially designed smooth head attached securely to the OneGloss polishers -
-
A comprehensive new technique kit comprising of the colour coded, proven Super-Snap Black Disk (Contouring), Violet Disk (Finishing) and novel Super-Snap X-TREME Green Disk (Polishing), Red Disk (Super-polishing) in both 12 mm and 8 mm diameter. Double ended Polystrips that correspond to the colour coded grit of the disks are included for interproximal finishing and polishing. The kit also contains Dura White stones, Composite and Composite Fine points to complement the disks and easily create detailed surface anatomy in direct aesthetic resin restoration.
Packing:
1/Kit
-
-
Super-Snap X-TREME Technique Kit:
160 x disks, 40 x polystrips, 2 x Dura-White Stones CA (CN1 & FL2), 2 x Composite Midi-Point CA, 2 x Composite Fine Midi-Point CA, 4 x Super-Snap CA Mandrels -
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Minipoint
ISO No.: 030
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: KN7
ISO No.: 125
Shank:HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Minipoint
ISO No.: 030
Shank: CA -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Knife
ISO No.: 090
Shank: CA -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost effective and avaailable in HP as well as CA shanks to suit all polishing sufaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) - for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank) - for superpolishing all types of ceramic -
Shape: Bullet
ISO No.: 040
Shank: HP -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Usage note: Intra-oral polishing should be done in dry conditions with intermittent strokes; excessive overheating of pulp is avoided by coding with stream of compressed air
A diamond-coated rectangular cleaning and reshaping instrument.
Packing:
1/Pack
-
Benefits:
Multiple layers natural diamond particles are electrocoated on the dresser that assures durability and prevents clogging to maintain cutting efficiency.
Indications:
Specially designed for easy cleaning and precise reshaping of all abrasive stones and polishers. -
-
Three step diamond impregnated polishing system designed specifically for all ceramic restorations including lithium disilicate and fully contoured zirconia restorations.
Packing:
4/Box
-
Benefits:
- High gloss polish in just 3 easy steps
- Precise concentricity with uniform distribution of even sized diamond particles in resilient silicone compound ensures efficient performance with low vibration and minimal heat generation reducing the risk of micro cracks
- Eliminates the need for messy polishing paste
- Fast and efficient
- In HP and CA shank for lab and clinical use
Indications:
Developed for 3 steps systematic polishing of all creamic restorations:
ZiLMaster Coarse (green banded shank) - for finishing and pre-polishing
ZiLMaster Medium (blue banded shank) - for polishing
ZiLMaster Fine (yellow banded shank) - for super polishing -
Assortments are packed in a box of 4 pcs:
ZiLMaster Fine CA - Bullet, Knife, Cup & Minipoint -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Three step diamond impregnated polishing system designed specifically for all ceramic restorations including lithium disilicate and fully contoured zirconia restorations.
Packing:
4/Box
-
Benefits:
- High gloss polish in just 3 easy steps
- Precise concentricity with uniform distribution of even sized diamond particles in resilient silicone compound ensures efficient performance with low vibration and minimal heat generation reducing the risk of micro cracks
- Eliminates the need for messy polishing paste
- Fast and efficient
- In HP and CA shank for lab and clinical use
Indications:
Developed for 3 steps systematic polishing of all creamic restorations:
ZiLMaster Coarse (green banded shank) - for finishing and pre-polishing
ZiLMaster Medium (blue banded shank) - for polishing
ZiLMaster Fine (yellow banded shank) - for super polishing -
Assortments are packed in a box of 4 pcs:
ZiLMaster Medium CA - Bullet, Knife, Cup & Minipoint -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: Unmounted Wheel
ISO No.: 220
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: WH6
ISO No.: 120
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N