- Impressively semi-permanent Instructions for use
- Quick & easy
- Long-lasting with excellent results
- Optimum mechanical properties
- Time- and cost-saving
Packing:
1 x 50ml/Cartridge
15 x Automix-Tips
LuxaCrown
-
Long-lasting restorations have never been easier.
The unique LuxaCrown allows for the simple, quick and cost-effective manufacture of long-lasting crowns – directly chairside.
In this way you can offer your patients an excellent and reliable alternative to lab processed crowns. The easy to produce LuxaCrown is precision-fit, cost-effective and exceptionally long-lasting with a wear duration of up to five years.
Discover the new possibilities for you and your patients. -
-
PermaCem 2.0 – the new generation of self-adhesive luting composite.
The recently developed adhesive monomer formula provides superior natural adhesive strength of PermaCem 2.0 with Zircon. Outstanding adhesion on zircon ceramics will give you a sense of security and confidence.
The special Flow 2.0 formula also provides for easy handling and incredibly simple excess removal.
Packing:
1 x 9g Smartmix Syringe
15 x Smartmix-Tips Short
5 x Smartmix-Tips Endo M
Instructions for Use
PermaCem 2.0
-
- Outstandingly strong adhesive to zirconia, silicate and oxide ceramics
- Secure adhesion to metals and composites, too
- Time-saving application
- Extraordinary flow under pressure
- Easiest excess removal
The new generation of self-adhesive luting." - PermaCem 2.0 -
-
PermaCem 2.0 – the new generation of self-adhesive luting composite. Instructions for Use
The recently developed adhesive monomer formula provides superior natural adhesive strength of PermaCem 2.0 with Zircon. Outstanding adhesion on zircon ceramics will give you a sense of security and confidence.
The special Flow 2.0 formula also provides for easy handling and incredibly simple excess removal.
Packing:
1 x 9g Smartmix Syringe
15 x Smartmix-Tips Short
5 x Smartmix-Tips Endo M
PermaCem 2.0
-
- Outstandingly strong adhesive to zirconia, silicate and oxide ceramics
- Secure adhesion to metals and composites, too
- Time-saving application
- Extraordinary flow under pressure
- Easiest excess removal
The new generation of self-adhesive luting." - PermaCem 2.0 -
-
PermaCem 2.0 – the new generation of self-adhesive luting composite. Instructions for Use
The recently developed adhesive monomer formula provides superior natural adhesive strength of PermaCem 2.0 with Zircon. Outstanding adhesion on zircon ceramics will give you a sense of security and confidence.
The special Flow 2.0 formula also provides for easy handling and incredibly simple excess removal.
Packing:
1 x 9g Smartmix Syringe
15 x Smartmix-Tips Short
5 x Smartmix-Tips Endo M
PermaCem 2.0
-
- Outstandingly strong adhesive to zirconia, silicate and oxide ceramics
- Secure adhesion to metals and composites, too
- Time-saving application
- Extraordinary flow under pressure
- Easiest excess removal
The new generation of self-adhesive luting." - PermaCem 2.0 -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
8 x 50ml Cartridges
16 x Automix-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
- Precision in just a single step
- Precise reproduction of the preparation line
- Finest surface details
- Lower final hardness
- Good hydrophilicity
Packing:
2 x 50ml Cartridges
4 x Automix-Tips
4 x Intraoral-Tips
Silagum-Mono is the material of choice for one-phase and one-step impressions. It is extremely suitable for fixation impressions and also for impressions of crown and bridge preparations.
Instructions for use
Packing:
2 x 50ml Cartridges
4 x Automix-Tips
4 x Intraoral-Tips
Silagum-Mono
-
- Reproduces the finest details owing to excellent flow properties
- Easy and precise application with Intraoral-Tips
- Remains firm in the tray and on the preparation
- Tube material has slight mint flavor -
-
Honigum-Mono was specially developed for mono-phase technique to facilitate high precision impressions in only one step.
Packing:
1x380ml & 10 MixStar Tips White
-
- Precision in just a single step
- Precise reproduction of the preparation line
- Finest surface details
- Lower final hardness
- Good hydrophilicity -
-
Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars.
The final hardness of Silagum-MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques.
The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types.
Packing:
4 x 262ml Base
4 x 262ml Catalyst
Instructions for use
Silagum-Putty/Light
-
- Exceptional dimensional
- Snap-set behavior
- Easy and mess-free handling
- Excellent recovery after deformation -
-
Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas.
Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
- - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
-
-
Icon Proximal Caries Infiltrant fills the gap between fluoridating and drilling.
Packing:
2 Treatment units each including:
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Tooth friendly filling by infiltration – no drilling needed
- Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the tooth
Tips from the practice
1. Exact diagnosis with bitewing x-rays
- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon -
-