Shofu

Beautifil-Bulk Restorative provides exceptional condensability and sculptability ideal for posterior restorations. Delivering superb shade stability, low shrinkage stress and full polymerization at 4 mm, Beautifil-Bulk Restorative is an esthetic, advanced Giomer restorative you can rely on.

Packing:
4.5g

Brochures
Giomer

Instructions for Use
Beautifil-Bulk Restorative Syringe

• Product Features
• Specifications
• Usage Instruction

• - High fill ratio (87.0 wt% 74.5 vol%) reduces polymerization shrinkage and shrinkage stress while increasing compressive and flexural strength
  - Ideal balance of light diffusion and transmission ensures complete polymerization at 4 mm depth of cure
  - Outstanding Vickers hardness value
  - Optimum translucency creates esthetic shades unaffected by surrounding intraoral color
  - Sustained fluoride release and rechargability
  - High level of radiopacity
• 
  
• 
  

Made of a high concentration of aluminium oxide with silicone as binder, created specially for finishing and polishing of direct resin restorations with only one instrument, just by altering the contact pressure.

Packing:
50/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Saves time as finishing and polishing can be achieved with a single instrument
  - Eliminates the need for polishing paste
  - Disposable polishers comply with infection control protocols
  - Low vibration and minimal heat generation
  
  Indications:
  
  Ideal for:
  - Finishing and polishing of all tooth coloured restorations
  - Creating surface texture on direct cosmetic restorations
  - Removing surface stain without damaging the enamel
  - Polishing enamel after scaling
  - Removing excess cement without marring enamel or damaging delicate inlays
  - Removing excess cement after Orthodontic debanding
• Recommened Speed Range: 3000-10000 rpm/ Max. 15000 rpm
  Contact Pressure: 1N (for Finishing)/ Feather Light (for Polishing)
  Usage Note: Water coolant when finishing & Dry when polishing

Impregnated, autoclavable silicone polishers are perfect for finishing and polishing glass ionomer and hybrid composites without scratching or chipping the surrounding enamel.

Packing:
12/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Cups and Disks are best for polishing subgingival and interproximal surfaces, while Pear-Point and Midi-Point are ideal for polishing occlusal and lingual surfaces
  - Eliminates the need for messy polishing paste
  - Long-lasting tool life
  - In CA shank and a few shapes in FG shank
  
  Indications:
  
  Available in 2 grits for polishing all types of resin materials and glass ionomers:
  CompoSite Polishers - Aluminium oxide impregnated Silicone polisher for finishing and pre-polishing
  CompoSite Fine Polishers (white band) - Zirconium dioxide impregnated Silicone polisher for a lustrous polish
  
• Recommened Speed Range (CA Shank): 10000-12000 rpm/ Max. 20000 rpm, Contact Pressure: 0.5 N
  Recommened Speed Range (FG Shank): 10000-12000 rpm/ Max. 15000 rpm, Contact Pressure: 0.5 N

Diamond impregnated polishers designed with a unique blend and high density of natural diamond particles to provide an exceptionally smooth surface on any composite material.

Packing:
4/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Enables simple, fast and efficient polishing and super polishing of composites, for intra oral, chair side or laboratory use
  - Durable and cost effective two-step polishing system, available in HP and CA shank
  - Precise concentricity with uniform blend of diamond particles in a resilient silicone compound ensures consistent performance with low vibration and minimal heat generation
  - Eliminates the need for messy polishing paste
  
  Indications:
  
  Developed for fine finishing to super-polishing of direct resin restorations:
  CompoMaster Coarse(yellow polisher) - for finishing & pre-polishing in one step
  CompoMaster(yellow & white bands) - for superpolishing
• 
  
• Recommened Speed Range(Mounted Polisher): 5000-15000 rpm/ Max. 20000 rpm, Contact Pressure: 0.5N
  Recommended Speed Range(Unmounted Wheel): 5000-10000 rpm/ Max. 15000 rpm, Contact Pressure: 0.5N

Diamond impregnated polishers designed with a unique blend and high density of natural diamond particles to provide an exceptionally smooth surface on any composite material.

Packing:
Mounted Polishers: 3's/Box 
Unmounted Wheel: 1pc/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Enables simple, fast and efficient polishing and super polishing of composites, for intra oral, chair side or laboratory use
  - Durable and cost effective two-step polishing system, available in HP and CA shank
  - Precise concentricity with uniform blend of diamond particles in a resilient silicone compound ensures consistent performance with low vibration and minimal heat generation
  - Eliminates the need for messy polishing paste
  
  Indications:
  
  Developed for fine finishing to super-polishing of direct resin restorations:
  CompoMaster Coarse (yellow polisher) - for finishing & pre-polishing in one step
  CompoMaster (yellow & white bands) - for superpolishing
• Recommended Speed Range (Mounted Polishers): 5000-15000 rpm / Max. 20000 rpm, Contact Pressure: 0.5 N
  Recommended Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 0.5 N
  Usage note: Intra-oral polishing is done under dry conditions with intermittent strokes and steam of compressed cool air to avoid excess overheating of the pulp.

Impregnated with silicon carbide in high grade silicone, Ceramiste polisher is suitable for polishing both porcelain and natural enamel.

Packing:
12/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Low contact pressure minimises heat generation
  - Uniform concentricity for low vibration
  - Autoclavable and durable polishers
  - Eliminates the need for messy polishing paste
  - Cups and Midipoints in CA & FG Shanks only
  
  Indications:
  
  Designed to acheive a glazed-like polish on porcelain and enamel. Systematic polishing in 3 steps:
  Standard - for pre-polishing
  Ultra (yellow band) - for polishing
  Ultra II (white band) - for high gloss polishing
• Recommended Speed Range: 10000-12000 rpm/ Max. FG shank 15000 rpm/ HP & CA Shank 20000 rpm
  Contact Pressure: 1-2N

These popular silicone polishers are impregnated with high quality polishing ingredients for fast and brilliant polishing of amalgam, gold and cast alloys.

Packing:
12/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - High gloss polish achieved in 3 co-ordinated steps
  - Brownies, Greenies and Supergreeniess are autoclavable or can be disinfected in cold sterilization and doesn't require any polishing paste or pumice
  - Precise concentricity with low vibration and minimal heat generation
  - Fast, efficient and durable for consistent performance over time
  - Mini-points are recommended for polishing occlusal surfaces and Cups for proximal and occlusal areas; both available in CA/ FG shank
  
  Indications:
  
  Ideal for chairside and in lab pre-polishing, polishing and high-gloss polishing of metallic restorations such as inlay, onlays, crowns and bridges.
  Brownies - for achieving a smooth surface
  Greenies - for a lustrous polish
  Supergreenies (with yellow band) - for a final superpolish
• Recommended Speed Range: 5000-7000 rpm
  Contact Pressure: 1-2 N (Water coolant to be used for amalgam polishing

Made of high quality silicon carbide grit, Dura-Green and Dura-Green Stone Fine are exceptionally durable and are popular chairside as well as in the laboratory.

Packing:
12/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  Dura-Green Stones
  - Precise concentricity with low vibration
  - Consistent cutting efficiency
  - Balance of binder and abrasive particles ensures durability and optimal cutting ability
  - Available in a variety of shapes in HP and CA shanks and selected number of shapes in FG shank
  Dura-Green Stones Fine (yellow band)
  - Produced with a finer grit size with the same positive properties as the proven Dura-Green Stones
  - Available only in HP shank
  
  Indications:
  
  Designed for fast and splinter proof contouring and finishing of porcelain, composite, precious alloys and amalgam.
  In the dental laboratory, the extensive range of shapes enable the technician to optimally reproduce individual characteristics of the surface texture of natural tooth.
  Chairside in dental practice, Dura-Green stones are used for quick and simple contouring and finishing of all modern restorative materials.
  Dura-Green Stones Fine (yellow band) is created for adding surface characteristics and adjusting fine details on porcelain and composites.
  
• Recommended Speed Range: 5,000-20,000 rpm/ Max. 30,000 rpm
  Contact Pressure: 3-5N

Acrypoints are designed incorporating the unique polishing tecnology of Shofu, for adjusting, finishing & polishing of all types of acrylic appliances, impression trays and acrylic dentures to a high lustre, in the laboratory or chairside.

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Specific abrasive grits used for each of the 3 co-ordinated polishing steps
  - Abrasive grains and binder are perfectly matched
  - High gloss polishing without the need of additional, messy polishing paste
  -Low vibration and minimal heat generation
  
  Indications:
  
  Available in 3 different grits HP Shanks only:
  Coarse (dark grey) - for adjusting
  Medium (brown) - for finishing and pre-polishing
  Fine (light grey) - for polishing
• Shank: HP (Handpiece)
• Recommened Speed Range : 5000-10000 rpm / Max. 15000 rpm
  Contact Pressure: 3-5 N

Dura-Green DIA is a vitrified-diamond bonded abrasive designed to provide a consistently smooth, chipless cut on porcelain or all-ceramic substrares. A dense, well-balanced layering of diamond particles embedded from surface to core in a special glass binder ensures greater
durability, cutting efficiency and a smoother surface.

Rotary instruments come in 3 different shanks:
HP (Handpiece) Shank
- A smooth, precise HP shank is attached to the chuck of the straight dental handpiece
Standard diameter of HP shank: 2.35mm
CA (Contra Angle) Shank
- A precisely shaped CA shank fits positively in a CA handpiece and is manually locked in place with the aid of a groove at the lower end of the shank
Standard diameter of CA shank: 2.35
FG (Friction Grip) Shank
- A smooth, even FG shank is used in a high speed turbine handpiece
Standard diameter of FG shank: 1.6mm

Packing:
2/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - Low vibrations & minimal heat generations minimize the risk of micro fractures
  - Low contact pressure & high edge stability
  - No residual contaimination on the restoration surface
  - Air holes optimally distributed thoughout the abrasive minimizes clogging for a consistent performance
  - Available in HP x 8 and CA x 3, total of 11 shapes
• 
  
• Ideal for contouring and finishing all types of ceramics including porcelain, lithium disilicate and zirconia restorations.
  Recommended Speed Range: Max. 30,000rpm

Three step diamond impregnated polishing system designed specifically for all ceramic restorations including lithium disilicate and fully contoured zirconia restorations.

Packing:
3/Box

• Product Features
• Specifications
• Usage Instruction

• Benefits:
  
  - High gloss polish in just 3 easy steps
  - Precise concentricity with uniform distribution of even sized diamond particles in resilient silicone compound ensures efficient performance with low vibration and minimal heat generation reducing the risk of micro cracks
  - Eliminates the need for messy polishing paste
  - Fast and efficient
  - In HP and CA shank for lab and clinical use
  
  Indications:
  
  Developed for 3 steps systematic polishing of all creamic restorations:
  ZiLMaster Coarse (green banded shank) - for finishing and pre-polishing
  ZiLMaster Medium (blue banded shank) - for polishing
  ZiLMaster Fine (yellow banded shank) - for super polishing
• Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
  Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N

Adjust the intensity of the Lite Art paste stains.

Packing:
1 x 6 mL Clear Liquid

• Product Features
• Specifications
• Usage Instruction