Diamond impregnated polishers designed with a unique blend and high density of natural diamond particles to provide an exceptionally smooth surface on any composite material.
Packing:
Mounted Polishers: 3's/Box
Unmounted Wheel: 1pc/Box
-
Benefits:
- Enables simple, fast and efficient polishing and super polishing of composites, for intra oral, chair side or laboratory use
- Durable and cost effective two-step polishing system, available in HP and CA shank
- Precise concentricity with uniform blend of diamond particles in a resilient silicone compound ensures consistent performance with low vibration and minimal heat generation
- Eliminates the need for messy polishing paste
Indications:
Developed for fine finishing to super-polishing of direct resin restorations:
CompoMaster Coarse (yellow polisher) - for finishing & pre-polishing in one step
CompoMaster (yellow & white bands) - for superpolishing -
Recommended Speed Range (Mounted Polishers): 5000-15000 rpm / Max. 20000 rpm, Contact Pressure: 0.5 N
Recommended Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 0.5 N
Usage note: Intra-oral polishing is done under dry conditions with intermittent strokes and steam of compressed cool air to avoid excess overheating of the pulp.
Three step diamond impregnated polishing system designed specifically for all ceramic restorations including lithium disilicate and fully contoured zirconia restorations.
Packing:
3/Box
-
Benefits:
- High gloss polish in just 3 easy steps
- Precise concentricity with uniform distribution of even sized diamond particles in resilient silicone compound ensures efficient performance with low vibration and minimal heat generation reducing the risk of micro cracks
- Eliminates the need for messy polishing paste
- Fast and efficient
- In HP and CA shank for lab and clinical use
Indications:
Developed for 3 steps systematic polishing of all creamic restorations:
ZiLMaster Coarse (green banded shank) - for finishing and pre-polishing
ZiLMaster Medium (blue banded shank) - for polishing
ZiLMaster Fine (yellow banded shank) - for super polishing -
Recommened Speed Range (Mounted Polishers): 10000-15000 rpm / Max. 20000 rpm, Contact Pressure: 1.5 N
Recommened Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 1.5 N
The two new components added to the Beautifil composite line allow dentists to restore pink-white aesthetics and produce truly lifelike restorations.
Packing:
Each
-
- Indicated in cases of gingival recession, exposed abutments and crown margins, root erosion and missing papillae
- Shades can be layered and blended for aesthetic solutions without the need for surgery
- Perfect for Class V restorations
Porcelain Primer is designed to prime feldspathic porcelain and indirect composite restorations.
Packing:
Bottle of 5ml (3234)
-
Contains silane coupling agent that enhances bond strength to porcelain as well as indirect resin restorations during intra-oral cementation or repair.
-
-
Self etching fluoride releasing pit & fissure sealant
Packing:
Each
-
This fissure sealant is simple and gentle on the tooth substance and consists of the BeautiSealant primer and the BeautiSealant paste. The self etching primer shortens the conventional treatment time by eliminating the treatment steps of etching and rinsing.
The treatment is gentle, as the demineralised and dehydrated Effect of the phosphoric acid etching on healthy tooth substance is avoided.
- BeautiSealant achieves a sheer bond strength of 19.5 MPa, which is comparable or even better than fissure sealing with phosphoric etching
- The BeautiSealant paste continuously releases fluoride
Secure Seal
The paste has an optimal flow and bubble free consistency and is easy to apply, hence completely filling and permanently sealing gaps and voids. A specially developed ultra fine 27 gauge cannula (ø 0.4 mm) for precise application is part of the set.
Benefits
Ideal handling and viscosity
Eliminate trapped air due to bubble free consistancy
Radiopacity equal to dentine: 0.92 mm Al
High shear bond strength without etch and rinse technique
Application in four easy steps within 30 seconds
Indications
Preventive pit and fissure sealant of deciduous and permanent teeth.
-
Color: Tooth Colored
Cure Type: Self Cure
Item: Pit & Fissure Sealant
Packaging Type: Bottle
Quantity: Each
Weight: 3 mL
- Apply adequate amount of Primer on the enamel surface of the pit and fissure using a brush.
Leave undisturbed for 5 sec.
Gently air blow for about 3 sec and then dry with stronger stream of air
until a thin and uniform bonding layer is obtained.
Resin Glaze light-cure, temporary surface resin coat is developed to simplify the final finishing processes by providing a naturally aesthetic glaze on a range of indirect resin restorations from indirect composites, acrylic dentures and artificial teeth as well as hybrid ceramics. It is especially suitable to coat and protect difficult to access/polish areas of posterior restorations- pits and fissures, interproximal surfaces from staining/discoloration.
Packing:
Resin Glaze Liquid, 6ML (PN Y0004)
Brochures
Resin Glaze - Product Brief
-
Remarkable Colour Stability - Minimizes discoloration after optimal light curing
Hight level of surface cure - Minimal residual monomer (sticky layer)
Excellent Surface Gloss - Aesthetic surface luster with just one application
Greater durability and wear resistance - Higher degree of monomer conversion ensures uniform and deep cure
PRG Barrier Coat – A light-cured Giomer varnish for prolonged hypersensitivity relief. Seals and protects exposed dentinal tubules to prevent pain. Ideal for patients experiencing loss of enamel, gingival recession or temporary sensitivity due to whitening.
Packing:
8 (0.02 mL) base units, 1 (0.09 mL) active, 8 brushes
Brochures
PRG Barrier Coat
Instructions for Use
PRG Barrier Coat
-
- Quick and easy to apply
- HEMA, Acetone and Alcohol Free
- Fluoride release and rechargeability
- Anti-plaque effect
- Ideal for enhancing patient’s intraoral health
- Indications other than hypersensitivity: Hard to brush areas (orthodontic brackets, crowded teeth) and high caries risk areas (exposed root surfaces, newly erupted molars, white spots)
Lab series stones are made of pure aluminum oxide and are free from carbon contaminants. Use the White Lab Series Stones for finishing noble and predominantly base ceramic metals, Pink Lab Series are for high noble ceramic metals and Coral Lab Series are for chrome-nd nickel alloys.
Packing:
12/Box
-
Features:
- Aluminum oxide grit
- Free from carbon contaminants
- Use Lab Series White & Pink for: precious alloys
- Use Lab Series Coral for: non-precious alloys & model castings -
ISO No.: 070
Shank: HP -
A comprehensive and resilient, diamond impregnated finishing and polishing system for lab/ chairside use, containing an assortment of Dura-Green DIA and colour-coded ZiLMaster Polishers that provide the highest natural lustre on all types of modern ceramics including Zirconia and Lithium Disilicate restoration.
Packing:
1/Kit
-
Features:
This kit is suitable for finishing and polishing oxide and silicate ceramic restoration
- Fast and efficient contouring with Dura-Green DIA. Dura-Green DIA comprises of densely packed diamond particles from the surface to the core of the abrasive head to enable superior and consistent cutting efficiency until the entire abrasive is worn out
- Fine finishing and smoothening to eliminate all remaining scratches with ZiLMaster Coarse
- Pre-polishing with ZiLMaster Medium
- High lustre polishing with ZiLMaster Fine ZiLMaster polishers are designed with an excellent balance of the diamond particle size, distribution and the resilient silicone binder to assure the smoothest surface and high natural gloss with minimal wear of the abrasive
- The durable abrasive points are autoclavable and durable -
The Kit contains:
Dura-Green DIA – TC4, KN7 & WH6 x 1 each
ZiLMaster Coarse HP – Bullet, KN7 & WH6 x 1 each
ZiLMaster Medium HP – Bullet, KN7 & WH6 x 1 each
ZiLMaster Fine HP – Bullet, KN7 & WH6 x 1 each -
Recommened Speed Range:
Dura-Green DIA: 30,000 rpm
ZiLMaster Coarse / Medium / Fine: 20,000 rpm
A specially selected assortment for adjusting non-precious alloys chairside or in the laboratory.
Packing:
1/Kit
-
Features:
Lab Series stones are made of pure aluminium oxide for adjusting PFM alloy without any hassle of carbon contamination while Hardies smoothen away fine scratches and assure fast polishing of the metal surface. -
The Kit HP Contains:
- 2 each x Lab Series White Stones No.1,
No.2, No.3, No.4, No.5 for adjusting
- 2 each x Hardie-Black (PC2) for polishing -
Recommended Speed Range for Hardie & Lab Series White Stone: 5,000 - 30,000 rpm / Max. 30,000 rpm
Dura-Polish Dia is a diamond impregnated (67% by weight) polishign wax for high luster polish.
Packing:
1/Jar
-
Benefits:
- Composed of a high density of ultura-fine diamond particles (less than 1 in size) for excellent results
- Special formulation of the polishing wax assures that Dura-Polish Dia is easy to apply on the brush or buff and also retains for a long time for efficient polishing
- Optimal paste viscosity minimises splatter
Indications:
Designed to provide a consistent and exceptionally high gloss polish on indirect composite, porcelain and zirconia as well as hard resin and alloys. -
Packed in a jar of 5g
-
Recommened Speed Range : Max. 10000 rpm
Usage Note: Extra-oral use with Robinsons Brush or Buff Wheels in HP Shank
A comprehensive, colour coded, disposable disk system for fast, efficient, safe finishing and polishing of all direct aesthetic materials. Coated disks and interproximal strips are optimised for use on all types of micro-fille and hybrid resins.
Packing:
6/Box
-
Benefits:
- Unmounted Super-Snap Disks are designed with soft, safe plastic snap-on mounts for mandrels
- Non-metal centre prevents gouging or discolouration of composite or enamel surface
- Improved christmas tree shaped mandrel ensure retention pf plastic mounts and maximum control during use
- Disks come in 12mm and 8mm. 8mm Mini disks provide perfect control in cervical areas
- Disks come in safe side down, safe side up and double side coated for flexibility of use
- Thin yet resilient disks enable easy adaption and access to various surfaces of anterior teeth
Indications:
Ideal for finishing and polishing anterior resin restoration by sequential use of the 4 different colour-coded disks and interproximal strips:
Black - for Contouring
Violet - for finishing
Green - for polishing
Red - for Superpolishing -
Shape: Mandrel
Shank: CA
