Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars. Instructions for use
The final hardness of Silagum-MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques.
The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types.
Packing:
1 x 262ml Base
1 x 262ml Catalyst
Silagum-Putty/Light
-
- Exceptional dimensional
- Snap-set behavior
- Easy and mess-free handling
- Excellent recovery after deformation -
-
Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars. Instructions for use
The final hardness of Silagum-MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques.
The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types.
Packing:
1 x 262ml Base
1 x 262ml Catalyst
Silagum-Putty/Light
-
- Exceptional dimensional
- Snap-set behavior
- Easy and mess-free handling
- Excellent recovery after deformation -
-
Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars.
The final hardness of Silagum-MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques.
The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types.
Packing:
4 x 262ml Base
4 x 262ml Catalyst
Instructions for use
Silagum-Putty/Light
-
- Exceptional dimensional
- Snap-set behavior
- Easy and mess-free handling
- Excellent recovery after deformation -
-
Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars. Instructions for use
The final hardness of Silagum-MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques.
The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types.
Packing:
1 x 262ml Base
1 x 262ml Catalyst
Silagum-Putty/Light
-
- Exceptional dimensional
- Snap-set behavior
- Easy and mess-free handling
- Excellent recovery after deformation -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
1 x 380ml Cartridge
10 x MixStar-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
5 x 380ml Cartridge
50 x MixStar-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Packing:
5 x 380ml Cartridges
50 x MixStar-Tips
Instructions for use
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
Honigum-Heavy was specially developed for all two-phase impression techniques, and, among other things, this material stands out with its exceptionally high final hardness. Thanks to its good fixation ability the noted Brånemark Center recommends Honigum-Heavy specifically for implant impressions.
Instructions for use
Packing:
1 x 380ml Cartridge
10 x MixStar-Tips
Honigum-Heavy
-
Extremely high hardness
Honigum-Heavy exhibits easy cutting characteristics for providing pressure relief channels in corrective treatments.
These are necessary in order to obtain an optimal detail reproduction with the secondary impression.
Especially for implant impressions Honigum-Heavy exhibits good fixation and torsion-preventing characteristics.
For combined treatments with implants and prepared teeth double mixing impressions with Honigum-Light are recommended. For implant treatments Honigum-Heavy should be used as a mono-phase impression material.
Good resistance
With the double mixing impressions Honigum-Heavy exhibits a good stability in the tray and optimal resistance when positioned. The light-bodied material Honigum-Light thus penetrates into the subgingival areas.
Whether correction impressions or double mixing technique: Impressions with Honigum-Heavy result in fitting restorations.
- Exceptionally high final hardness
- Optimal resistance when positioned
- Excellent fixation characteristics
- Trouble-free and safe removal
- Invariably homogeneous, bubble-free material quality -
-
- Good hydrophilicity
- Flowable viscosity
- Available in two versions: regular and fast
Packing:
2 x 50ml Cartridges
12 x Automix-Tips
12 x Intraoral-Tips
Instructions for use
Silagum-Putty/Light
-
Proven correction material based on VPS.
The use of Silagum-Light as the second phase of the correction technique or the double mixing technique ensures a precise impression of the marginal area of the preparation. Silagum-Light exhibits a convenient viscosity that simplifies the application, but at the same time ensures safe handling by the user. -
-
- Good hydrophilicity
- Flowable viscosity
- Available in two versions: regular and fast
Packing:
2 x 50ml Cartridges
12 x Automix-Tips
12 x Intraoral-Tips
Instructions for use
Silagum-Putty/Light
-
Proven correction material based on VPS.
The use of Silagum-Light as the second phase of the correction technique or the double mixing technique ensures a precise impression of the marginal area of the preparation. Silagum-Light exhibits a convenient viscosity that simplifies the application, but at the same time ensures safe handling by the user. -
-
Silagum-Mono is the material of choice for one-phase and one-step impressions. It is extremely suitable for fixation impressions and also for impressions of crown and bridge preparations.
Instructions for use
Packing:
2 x 50ml Cartridges
4 x Automix-Tips
4 x Intraoral-Tips
Silagum-Mono
-
- Reproduces the finest details owing to excellent flow properties
- Easy and precise application with Intraoral-Tips
- Remains firm in the tray and on the preparation
- Tube material has slight mint flavor -
-
- One of the hardest VPS-based bite registration materials Instructions for use
- Superior break restistance
- Fresh fruity orange scent
- Minimal bite resistance
- Fast-curing
Packing:
2 x 50ml Cartridges
12 x Automix-Tips
O-Bite
-
Maximum final hardness
With a Shore-A-hardness of 93.3, O-Bite is the hardest of all VPS-based bite registration materials. The material’s high final hardness is, particularly important for repositioning the bite registration on the models in the articulator in order to guarantee perfectly fitting restorations.
Softer silicones flex or compress, thus prohibiting a precise articulation. This can lead to unwanted bite elevations requiring a time-consuming grinding process. A direct insertion of an elevated restoration may cause significant discomfort in the mandibular joint.
With its superior hardness O-Bite ensures a gnathologically perfect tooth relationship.
Excellent break resistance
Thanks to its DMG-developed vinyl silicone matrix, O-Bite exhibits outstanding break resistance. The linking structure of the VPS material is achieved through silicone chains of equal length which facilitate a particularly stable linking structure when cured. For the application this characteristic guarantees high break resistance during removal, cutting and repositioning on the model. -
-